A build update... with a few Q's

[jasongray5]

I belive most people glue 'em! Sikaflex i think its called...
Jas

[geeman]

Originally Posted by jasongray5

I belive most people glue 'em! Sikaflex i think its called...
Jas

Hmm... Wouldn't have thought about glueing it on, but sounds quicker and easier thn making up brakets. Ok, I'll get a suitable gle and get them on asap.

[Enoch]

Nice lookinjg job, keep up the good work.

[twinturbo]

Originally Posted by jasongray5

I belive most people glue 'em! Sikaflex i think its called...
Jas

Never come apart if ya get it wrong mind, or if you have a bump you will be replacing the whole rear end.

TT

[geeman]

what version of sikaflex should i be using as there seem to be hundreds?? it seems like it'll either be 221 or 252?

[twinturbo]

Got some of this to do my floorpans

http://cgi.ebay.co.uk/SIKAFLEX-221-E...item2557e2988e

[geeman]

Originally Posted by twinturbo

Got some of this to do my floorpans

http://cgi.ebay.co.uk/SIKAFLEX-221-E...item2557e2988e

ok, will buy 2 tubes of it. thanks

[jasongray5]

Originally Posted by twinturbo

Never come apart if ya get it wrong mind, or if you have a bump you will be replacing the whole rear end.

TT

Apparently if you do need to get it apart, then you just need to slide a razor blade between the 2 surfaces, a right bitch to do so im informed tho...?

[geeman]

ok, ive got the clutch cable in, however, i am not able to push the pedal in, the clutch arm seems to be stuck,its not hitting the chassis, theres enough room for it, it has about 3 cm of play in in, then it doesn't move at all, i dont want to apply excessive force and break it... the clutch hasnt been used for about 6 months, what could be the reasons for it not moving, the only thing i could think of is i nay have hit the lever on something while the engine/box wasn't in.. any suggestions??

[twinturbo]

Is the leaver free from obstructions?

Sounds like the release bearing may be stuck on the input shaft.

TT