|
|
|
|
#1
15th April 2010, 04:49 PM
|
||||
|
||||
there are some guys on the fiat coupe forums that worked out if you make some little ali shims to go down the sides of the pads between the callipers it stops them squealing.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/ 
|
|
#2
15th April 2010, 05:17 PM
|
||||
|
||||
|
Will plenty of copper slip behind the pads not stop the screeching Steve?
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH
|
|
#3
15th April 2010, 06:31 PM
|
|||
|
|||
|
Chamfer the leading and trailing edges off and it may help,it does on normal road pads.
Bosch pads have a half circle cut out of the backing metal and this puts one edge on before the other and this helps stop the high frequency vibration/squealing.
|
|
#4
16th April 2010, 08:02 AM
|
||||
|
||||
|
Tried the rounding of pad edges and copper slip on the back, calipers already have shims in them so they are going in the bin!
Fingers crossed the yellowstuff are better AND quieter  Steve.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
