IVA Dash

[spud69]

Hi Gus,

Mark has just called regarding the Dash, has been away on hols for 2 weeks.

The 1/4 circle 19mm radius on the bottom of the dash is fine as long as the bottom of the bend terminates at the horizontal or beyond. If in doubt he recommends an easy fix of foam pipe lagging split and duct taped to the bottom of the dash to make it look permanent then only a 5mm radius is required.

Another solution is plywood covered in foam then vinyl, again, only required 5mm for a soft edge.

Hope this helps.....AndyH