Suspension bolt kit group buy

[Bonzo]

Hi Tatey

I think the best thing to do is start a list of folk that are interested

If anyone thinks the quantity or any of the sizes are wrong let me know .... It can be ammended accordingly & should not affect the price.

If you want in, just add your name to the list

1: Bonzo

2: Tatey

3: Greasemonkey

[greasemonkey]

me to please

[Bonzo]

Originally Posted by greasemonkey

me to please

Added to list

Prices are based on the lowest price that I can find at the moment

Rest assured, i'll continue hunting & will get to my local wholesaler to see if I can get a better price break.

Determined to get the cost down, as low as possible

[KenK]

Me too please, thanks

1: Bonzo

2: Tatey

3: Greasemonkey

4: KenK

[Bonzo]

Nice one KenK

I think One more & I will go ahead & order up .... I can then leave this offer open untill all 10 sets are gone

Now the good news

I have found a cheaper source for all of the fastenings except the longest bolts.

This stockist also has the Plastic nut covers at a very good price ( Some required fro IVA puposes )

Would folk like the appropiate nut covers included or would you prefer a lower, kit price ?

It would also be great if someone has an idea of exactly what nuts need to be covered .... It would be a real pitty not to order enogh if that's what folk want

[Tatey]

Id prefer for the nut covers to be included please Bonzo. I'll need them eventually and I can't see it costing much extra.

I know for certain that the roll bar bolts need to be covered (however i wont be needing these as my roll cage will be fully welded in).

[Bonzo]

You are dead right there Tatey, some nut covers will be needed for IVA

Being as I have managed to find a lower cost source for most of the fixings, i'll be able to include nut covers without increasing the original estimated cost of the bolt kit ( If that's what folk prefer )

I'll have a study of some post IVA buid pics & see if I can work out what nuts need to be covered

[les g]

Me too please, thanks

1: Bonzo

2: Tatey

3: Greasemonkey

4: KenK

5: les g & the nut covers please

[Tatey]

Bonzo i've had an idea, i'm not sure if others will want to to it. But what about also including the required number of plain M12 nuts, so that we can save the nylocs for the final fitting and just use plain nuts, since they will need to be taken off and put back on multiple times?

[Bonzo]

Originally Posted by Tatey

Bonzo i've had an idea, i'm not sure if others will want to to it. But what about also including the required number of plain M12 nuts, so that we can save the nylocs for the final fitting and just use plain nuts, since they will need to be taken off and put back on multiple times?

I havn't got a problem doing that Tatey

Buying in bulk, the plain BZP full nuts work out about 5p each

Quite happy to make each order up to suit the individual within reason

Tis time I stocked up the workshop anyways .... stacks of set bolts here but not a lot else