Today's Accomplishment

[Bonzo]

Originally Posted by Tatey

I'll be putting my hub carriers in once I can figure out how to remove the bearings, as I've learned from my uni course, that bearings really do not like electricity. I also need to figure out how to dissemble (without breaking ) the drum brake assembly, as that needs a good clean as well.

That's the exact same parts that I need to clean up .... When I get a moment, I will have a look at the rear bearing set up.

I seem to remember that they use pre-loaded taper bearings, if that is the case, once the oil seals are removed, the bearing inner races should just pop out
Doubt the tank will hurt the outer race shells !!??

I do stand to be corrected though