![]() |
#1
|
|||
|
|||
![]() Hi can someone help me I am trying to work out which way ru7&ru8 are positioned.I am using brake drums if I go with pics on page 69/70/72 and offer up the drum assembly the bleed niple will be to one side where as if I use pic on page 74 the bleed niple will be at the top where it normally is.Can anyone which one is right as I dont have much hair left to pull out.Thanks Aidan
|
#2
|
||||
|
||||
![]() Hi Aidan
If you are using the first edition of the book, the drawings were noted wrong. Here's a picture of some of my suspension components .... You may just be able to see which way the plate goes for drum brakes ![]() The small flat edges sit in the upright horizontal for drum brakes & vertical for disk brakes ![]() My Uprights are made for drums & have been test fitted on the rolling chassis, all is as it should be ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#3
|
|||
|
|||
![]() Hi Ronnie thanks for the picture your right I bought the book 3 years ago in detling.Have them tacked up now I did not know there were any amendments for the uprights.
|
#4
|
||||
|
||||
![]() No problems
![]() At least you noticed the problem before you had them fully welded up ![]() ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
![]() |
Thread Tools | |
Display Modes | |
|
|