|
|
|
|
#1
23rd May 2010, 08:54 AM
|
|||
|
|||
is this stuff ok to build with?
http://www.parkersteel.co.uk/Product...5+EN10305+E220 (Amazon still haven't delivered my damn book!!)
__________________
Failed builder 
|
|
#2
23rd May 2010, 10:01 AM
|
||||
|
||||
|
Yes, that's the material specified in the book
 You'll also need some 19mm X 19mm square tube to the same spec 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#4
23rd May 2010, 06:39 PM
|
||||
|
||||
|
Headshot,
You might have to run an average, HandyAndy and other will give you a precise amount I am sure, I got six 6m lengths of the 25mm and two of the 19mm. I think. Cheers Ginge
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! Build Pictures Build Thread
|
|
#5
23rd May 2010, 07:11 PM
|
||||
|
||||
|
As Ginge has suggested.....
6x 6mtr lengths of 25mm box ERW steel I would suggest you get 3x6mtr 19mm (20mm is ok) box ERW there will be times that a bit of spare comes in handy dummy shocks etccheers andy Last edited by HandyAndy : 23rd May 2010 at 07:13 PM.
|
|
#6
23rd May 2010, 07:14 PM
|
||||
|
||||
|
I would second that bit about the extra, I wish I had some ‘extra stock’ right now.
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! Build Pictures Build Thread
|
|
#7
23rd May 2010, 07:31 PM
|
|||
|
|||
|
Quote:
|
 |
| Thread Tools | |
| Display Modes | |
|
|
)
Hybrid Mode
