Master cylinder pivot - Haynes Forums

Peter-C Master cylinder pivot 23rd May 2010, 08:55 PM

drury318 Hi Peter, yes I made mine... 23rd May 2010, 09:36 PM

Enoch I made mine too. I cut the... 23rd May 2010, 10:01 PM

Peter-C Cheers lads, I'll have a go... 23rd May 2010, 11:06 PM

carlknight1982 Brought mine from Rally... 24th May 2010, 12:45 PM

Peter-C I've made my pivot and mocked... 25th May 2010, 07:45 PM

Enoch In my car the brake is full... 25th May 2010, 08:47 PM

jps Another ancient thread... 25th November 2012, 05:45 PM

K4KEV negligible ...yes but it does... 25th November 2012, 06:29 PM

deezee All the wobble, as its been... 26th November 2012, 10:53 AM

25th May 2010, 08:47 PM

Enoch

Senior Member

Join Date: Nov 2009

Location: Near Boston, Lincolnshire

Posts: 788

In my car the brake is full on after just a few mm of movement of the master cylinder piston. I have a little bit of slack in the pedal but I reckon the top of the pedal only moves about 25-30mm from rest to full on. Hope that helps.

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 03:49 PM.