Rear Arch Fitting

[gus]

Thanks for the reply Mark.

Just wondering, when you set your ride height did you do it with the car weighted as if it had a full tank and two people in it?

I did with mine which means that as the car is sat in the garage it has a rear ride height of approx 150mm which sinks to roughly 135mm with two people in it.

Cheers

Gus

[spud69]

Just like Mark has done Gus. Ride height seems about right, if you set your are so that its an even distance around your wheel it should bring the arches level with the bottom of the rear panel and the top parallel with the SS part of the rear panel.

Do mine the same and look all in proportion with 15" x 50 tyres on.

[mark]

Originally Posted by gus

Thanks for the reply Mark.

Just wondering, when you set your ride height did you do it with the car weighted as if it had a full tank and two people in it?

I did with mine which means that as the car is sat in the garage it has a rear ride height of approx 150mm which sinks to roughly 135mm with two people in it.

Cheers

Gus

Yeah i got me and brother in and took some measurements of how much it dropped to get it set about right