|
|
|
|
#1
5th July 2010, 10:10 PM
|
|||
|
|||
I have never had any dealings with gts and i'm sure there are some good items available but from the looks of the rear top wishbone adjusters I would be dubious of any items.....
 
|
|
#2
5th July 2010, 10:19 PM
|
||||
|
||||
|
Stuff from 3ge is made of metal and nylon, stuff from GTS is made using a light mixture of Nitrogen,oxygen and minor gasses.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#3
5th July 2010, 10:28 PM
|
||||
|
||||
|
pmsl at TT,
 I'd personally go for the 3GE ones!!!
|
|
#5
5th July 2010, 10:54 PM
|
|||
|
|||
|
you get what you pay for .... go for 3ge. ive tried using cheaper ones but they are never the correct size!
there are only 2 companies that i trust, Talon motorsport and 3ge for the bits that talon dont sell. Last edited by dan_g8 : 5th July 2010 at 11:24 PM.
|
|
#6
5th July 2010, 11:28 PM
|
||||
|
||||
|
My bushes cost £15 for the material I made them from delrin not the same as poly ones but im happy with them.
of course i machined them myself so that helped too. my crush tubes cost £3.50 for material from local scrap yard and yes it was stainless but kin hard to machine Ray 
|
|
#7
6th July 2010, 01:12 PM
|
||||
|
||||
|
Lots of people here have had problems with GTS if you look through old threads so i wouldnt bother unless you dont mind waiting 6 months for your parts .
 SATURN also do them for 98quid and at least you can get hold of handyandy or spud on here if you have any probs. http://www.saturnsportscars.co.uk/st...ewCat&catId=18
|
|
#8
6th July 2010, 02:13 PM
|
||||
|
||||
|
Quote:
Not always true... TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
