TwinTurbos Build Diary....

[twinturbo]

Tricky weld done this evening... Excelent few bobits to sort and send her back to the garage..

So wednesday may recomence Roadsting..

TT

[twinturbo]

Ok, the chassis went of to Saturn last week to have the brackets redone, and the rear tub bars removed to I can fit a Glass one.

I have done a bit of work tidying the garage.

Cut the second tunnel side pannel last night and trimmed a corner of the one floor I have ( can't do the other without the chassis. )


Changed the flywheel on the engine from the 2.9 to the 2.8 one. And took off the front diff.. Sump off tonight if I get to it

Pics to come.


TT

[twinturbo]

Pics still to come

Both floors have been cut and all the rivet holes have been drilled with the exception of the seat bearers ( still to position and fit ).

So, tunnel panels to drill , seat back to drill.. And the construction phase 1 to comence with me and the boy.. Hope he apreciates the prep work

TT

[twinturbo]

A few of the recent shots,

The vicious ( hahaha ) viscous fan put up considerably more of a fight than they usualy do.

Both floorpans are now done. it was a bit of a struggle cutting the ally tread plate as the saw kept getting stuck on swarf, WD40 helped a bit. Most of the holes are drilled.

And of course a shot of PAT1 returning my chassis.


Other progress includes both trans tunel pannels being cut and the first pair of seat mounting rails tacked in place. Seats and runners purchased



TT

[Bonzo]

Those fans can be a right pain to remove sometimes, looks like you had to give it a stern talking to

Pleased to hear that you are finding some time to make progress with your build