So how do I make my bonnet?

[Enoch]

Hi Andy, you have mail.
Mr H, on my build it's the plenum height at the rear of the engine that's the big issue. i think Andy's standard bonnet would clear the cam covers at the front but it's the shere height and enormity of the DOHC inlet that's the nightmare.
I did try making a cut down inlet but it turned in to a complete fiasco - I would need to tig weld it to do it properly and I don't know how to do that.
I might have to revisit it but thought the bulging bonnet would be easier.
It appears that Andy's bulge is huge but still not big enough for my needs.
Pick the bones out of that one handy yer dirty ole man