|
|
#4
25th July 2010, 05:37 AM
|
|||
|
|||
over here in New Zealand all our front and rear wishbones have to be TIG welded by a cert welder, iv been a Trade quail welder for the past 20yrs but have done limited TIG welding,so im going to fab, tack and send them off to a mate who will finish welding them. ( MIG welding is a big NO,NO over here for any suspisoin part!!!)
Then they will be sent away to be NDT tested costs about $40/item... 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode