![]() |
|
#1
|
||||
|
||||
![]() Ash has some good pics of his indicator extensions in this gallery at the bottom
http://s707.photobucket.com/albums/w...tuff/?start=20
__________________
Gallery 2 http://www.facebook.com/album.php?ai...4&l=a9831a9319 Gallery 3 http://www.facebook.com/album.php?ai...4&l=3f0d42c523 Gallery 4 http://www.facebook.com/album.php?ai...4&l=efb083b7df Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c |
#2
|
||||
|
||||
![]() Thanks David
![]() Thats what I,m after........Ash......thanks for the pics ![]() cheers andy |
#3
|
||||
|
||||
![]() Andy,
I did a similar thing to one of your ideas, except I made my extensions out of black electrical conduit. I epoxied a nut into each end so I could then screw the indicator to the extension. I did however have to drill a hole through a bolt to get the wires from the indicator into the nose cone. Doesn't look to bad, as is cheap & chearful to keep mr iva happy. Cheers Gus |
#4
|
|||
|
|||
![]() Kit parts direct do a pair of e marked indicators for 14 quid. They are 17cm long so extend well past the IVA limit when bolted through holes in the nose cone. As the Saturn nose cone does not have any flat surface to bolt them to I made little wedges that sandwich between the indicator stem and the nose cone so the indicators were level, a drop of black polyurethane neatened the edges up.
It seemed easier to me than having to make extensions, although I will say they are a bit on the large side and give a more "traditional" look. I quite like that look as I am an old git, you young whippersnappers may think differently ![]() Best and all that, Enoch |
#5
|
||||
|
||||
![]() Andy you can have my extensions if you want them.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/ |
#6
|
||||
|
||||
![]() Gus / Enoch.....cheers for the tips, was thinking of getting the indicators you mention Enoch, until I read the next post, smiles. WOW ![]() Thats very kind of you Ash ![]() ![]() question tho........don,t you need them? ![]() cheers andy Last edited by HandyAndy : 27th July 2010 at 04:46 PM. |
#7
|
|||
|
|||
![]() Extensions on the indicators are only needed for IVA, take them off afterwards as they look daft.
![]() |
#8
|
||||
|
||||
![]() Hi Ash,
The extensions arrived in todays post. ![]() Many thanks for them.....and they even have the correct nut to accept my indicators ![]() ![]() cheers andy |
#9
|
||||
|
||||
![]() With a big thanks to Ash, my indicators are now fitted,
Thanks Ash mate ![]() ![]() Nice & IVA friendly ![]() cheers andy ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|