One year old...

[alga]

I bought a tired Sierra with the front already ripped. You can imagine how my wife was happy with this sight outside during most of the winter.

Had some fun tearing it down in -10°C temps this past winter. Not too bad when all the rusted suspension nuts keep you constantly working hard.

Eventually I scrapped the shell and got some beer money after the VAT, transport and deregistration costs were counted out

Initially I though of using the Pinto that came with Sierra

but later I was persuaded to use a Zetec. Either with standard pre-PATS ECU or MegaSquirt (I'm looking forward to all the soldering, electronics are fun)

[alga]

I have the suspension bits all fabricated, primed and painted by now.


And here's me working on the rear upright jig sometime in the spring, with a silly "Zappa" beard style. Good job beards grow back pretty fast


So there, happy birthday, my roadster!

[alga]

Oh, I had some fun with electrolysis on the front hubs and rear drums, too!

The driveshafts are still filthy, and they need to get clean pretty quick if I want to get to the rolling chassis stage!

[HandyAndy]

Looking nice Albert

get it on wheels & you,ll be amazed how much motivation it gives you

I noticed one thing wrong tho.................the steering wheel is on the wrong side

Keep at it , look forward to the pics showing a rolling chassis.

cheers
andy

[alga]

Yeah, yeah. I've been looking at so many build pics on this forum that I almost welded in the steering support on the right.

[aerosam]

Just looking back at my blog, it seems I started mine 2 years and 4 months ago, and I'm still not finished!

Keep going Alga - looks like you are working to a really good standard - keep it up!

[carlknight1982]

I wouldnt worry guys I'm 3 years in and still not as far along as either of you!

mind you I made some daft decisions at the start with various things and have had 2 house moves a job change and a divorce to deal with so i dont worry to much, lol im still building to strip down again i didnt want to get the chassis powdercoated till all the holes were drilled and all the brackets welded