![]() |
|
#1
|
||||
|
||||
![]() Hi, i didnt really look at the engine today as i was busy bolting on all the bodywork, however i did find a leak in my chopped sump. Its dripping about a drop of oil every 2 days( i left paper under the sump to see if any oil drops). Apart fromt hat i cant seem to find any leaks. Could that explain why, other than that all that i have changed on the engine are sprak plugs and an oil filter, and tinkering with the carb.
Handyandy, ill have a look at what you said as i did notice that as well a month or 2 ago when i last tried to run the engine. Other than that im looking set to finish the car in about 2-3 weeks. I have to mount the front wheel arches, front indicators, change 1 or 2 bits of the wiring, fit some seats(once i get them) and buy some shocks, the price tag of which is still putting me off, whcih i know will end up costing me extra time as it is much harder to put the shocks on now.. cant wait till its done!!! ![]() ![]()
__________________
my build pics |
#2
|
|||
|
|||
![]() vac pipes off the inlet manfold conected?
you using hybrid ign system make sure all the pipes and wires are wired up. if so get a bit of wd around the gaskets to find if there leaking gasket |
![]() |
Thread Tools | |
Display Modes | |
|
|