Cp10 problems.

[KenK]

Oh b.....cks, just checked, i have put one the wrong way up!! Which is the correct way please before i get Mr Angry Grinder out!

Cheers
Ken

[ozzy1]

25mm offset hole at the bottom.

p45 section A-A

[KenK]

Cheers mate, grinder successfully deployed!

[les g]

why not just redrill the holes in the right place
you could also weld up the old holes if you need too
cheers les g

[leroybrown911]

Ok, just come across this problem myself. Am I right then taking the excess material off the top of CP10 and therefore maintaining the 25mm edge distance, and correct positon/height of diff from the table?

[ozzy1]

Yes take the excess off the top to maintain the 25mm from the bottom.

[leroybrown911]

Excellent, thanks Ozzy, thats what I thought.