New Build thread

[spud69]

Well done Kevin, looks like we've got another HAndy on our hands - or we're ll tight gits up north.

Them red mushies (must be magic ones) will look good in red.

All the Breast.....AndyH

[K4KEV]

Originally Posted by spud69

Well done Kevin, looks like we've got another HAndy on our hands - or we're ll tight gits up north.

Them red mushies (must be magic ones) will look good in red.

All the Breast.....AndyH

course we're all tight gits up ere ....I thought that was just common knowledge

[K4KEV]

the overwhelming urge to start the chassis was too much, so I nabbed an old oxy gauge I had lying around and rigged up my mig and after a little mucking around with flow rates I got what I was listening/looking for.....that familiar cackle you get when a mig set up is running right.....test piece looks like a modern sculpture

And so another roadster is being born.....so far I have not cocked up any measurements, angles are all coming out flush, everything is staying put. Up to now I am having a dream start and progressing well.... here is where I am at with the chassis so far.
Decided to use the build table itself to do the front frame

[AshG]

Looks like you need to up the amps and the gas a little more looking at those test bits. chassis is growing very nicely

[twinturbo]

always nice to see a chassis growing

TT

[K4KEV]

Yeah I know Ash....had it turned down a little just for tacking, Intend to ramp it up some for full welding of the chassis
Hi TT it's much nicer when its your own

[K4KEV]

Another few rails added mainly the seatback area.....finding very much like meccano without the holes, nut & bolts great fun even enjoying cutting the steel (something no one seems to enjoy)
heres another couple of pics