|
|
|
|
#1
2nd September 2010, 07:19 PM
|
||||
|
||||
Hi Nathan,
Welcome, indeed there is a list of corrections, but these are for the first run of books, but it pays to be sure, they can be found here http://www.haynes.co.uk/forums/showthread.php?t=2430 Kind regards John
__________________
Quality parts for the Haynes Roadster - manufactured to a standard, not down to a price. Contact us at component-sales@hotmail.co.uk or visit our website www.3gecomponents.com
|
|
#2
2nd September 2010, 08:20 PM
|
||||
|
||||
|
Hello Nathan,
Welcome and good to see another NE7'er on the build. If you're up in the Teesside area you're quite welcome to visit. Regards....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH
|
|
#3
2nd September 2010, 08:24 PM
|
||||
|
||||
|
Welcome along. As andy says, nice to see another being started in the north east
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
|
#4
2nd September 2010, 08:51 PM
|
||||
|
||||
|
Welcome to the forum,
hope you enjoy the build. Lots of friendly and knowledgable people on here, if in doubt just ask.
|
|
#5
2nd September 2010, 09:05 PM
|
||||
|
||||
|
Welcome to the mad house!!
The Ssssnake
__________________
______________________ Build cost to date £1120.00 and creeping
|
|
#6
3rd September 2010, 08:59 AM
|
||||
|
||||
Welcome Nathan
Welcome to the forum Nathan
If you are working fron the second edition of the book you should be fine. You should be able to find out what print version you have by looking on the first page. Tis still worth checking the ammendment thread though .... There is a very usefull Front frame tutorial there  Enjoy your build & remember, help is just a quick ask away 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#7
4th September 2010, 04:18 PM
|
||||
|
||||
|
thnaks for the warm welcome felles
Just finished cutting br1 to br12. Had a hard time cutting the 74 degree angles on br8 and br9 because my mitre saw wouldnt go that far!  I ended up using a hacksaw, it took ages but they turned out pretty good. Just going to set up the lines on the table so i should be welding tommorow! Nathan
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
