|
|
|
|
#1
10th September 2010, 11:51 PM
|
||||
|
||||
Well spotted John ,
Arfon...... I,ve just had a closer look at your build photos, in particular the 2nd photo on page 2...... With the position that your earth clamp is attached to your chassis & also looking at the junction of BR1/BR3 with BR10 it appears that you have both BR10 & BR11 positioned incorrectly, these 2 parts don,t have an open end tube on the outside of the chassis. I can,t see the ends of BR12 but would suggest to check that one too. cheers andy 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
