Headlights

[HandyAndy]

Originally Posted by tkpm

But the back stays are to short as i'm using one of Saturns tubs.

Terry

If the roll bar fits width wise for the Roadster are you able to remove the original back stays & extend them?
Or, depending where the back stays are "Heading down to" ....maybe "Build up" either side of "D13,s" ( there is available space there) to meet the shorter back stays....just a thought

cheers
andy

[tkpm]

the rollbar is already fitted and stay where never welded on. will get some tubing to make new back stays.

Terry

[HandyAndy]

Originally Posted by tkpm

the rollbar is already fitted and stay where never welded on. will get some tubing to make new back stays.

Terry

Result

There are a few different positions for the lower back stay mounting points when using the Saturn GRP tub, depending where you attach the back stays to the roll bar,
mine go from the bend of the roll bar right down to an extra plate welded into the chassis, then 4 bolts on either side secure the back stays to the chassis, so its easily removed if need be .

cheers
andy

[tkpm]

Have not made up my mind where to run the stays to yet, but i must make my mind up soon.

Terry