uprights modification

[K4KEV]

you will need a pair of these


these ones are anodised they are normally just natural aluminium colour.

[Bonzo]

You have done a cracking job on those mate

They look great with the Anodised finish .... Sad I know, it gives me the horn just looking at them

[flyerncle]

Sometimes the mushroom needs reaming to get the correct depth to allow sufficient thread through the locknut on the top balljoint.
The bottom balljoint reamer is ok for this.

[les g]

Originally Posted by K4KEV

you will need a pair of these


these ones are anodised they are normally just natural aluminium colour.

i,ll give you a tenner for a pair those they will match my bodywork nicely
cheers les g

[HandyAndy]

Originally Posted by les g

i,ll give you a tenner for a pair those they will match my bodywork nicely
cheers les g

Sorry Les.....couldn,t resist.........

They,ll also match your sexy REAR flexi brake lines

I,ll get my coat.

cheers
andy

[K4KEV]

Originally Posted by les g

i,ll give you a tenner for a pair those they will match my bodywork nicely
cheers les g

You might well do Les but I'd be waiting for the other 35 of her majesty's finest + p&p.
Hi Bonzo......nearly got a woody making them bud, espcially when I dyed them
Paul.....yep you could ream them out, but you could also turn a little off the back of the nylock to make sur enough threads have cut into the nylon
K4