Zetec Whats needed?

[Deanno]

was the idler put on sing a bracket?
so when i link it up to the tupe 9 i need a sierra starter?

do you have any dimensions for the braket you made to take pulley/ idler?

[Coozer]

Originally Posted by Deanno

was the idler put on sing a bracket?
so when i link it up to the tupe 9 i need a sierra starter?

do you have any dimensions for the braket you made to take pulley/ idler?

I made the idler just postion it so the belt got good contact round the other pulleys. You can put it anywhere really. If you look closely you can see the mole grips holding the belt? This was to get the length then down off to Halfords for the correct belt.

Steve

[Coozer]

Theres a few pics here:

http://picasaweb.google.com/Coozer18...bz_ei8r9bp3gE#

I have plenty more elsewhere if you need anything else.

Steve

[Deanno]

thanks for all your help.
no doubt you'll be hearing from me in the future.

[Coozer]

[David_17]

My sump looks just like your above pic steve, so should fit. Cheers

[David_17]

Here's my idler set up. Incase anyone reading this needs some inspiration. I just used some left over box section bolted to the oringinal engine mounting studs - Much easier than making a bracket that bolts onto the side of the block.