Pedal box

[tkpm]

I have just had all the piece for the pedal box delivered from 3GE/John and will be welding them together tomorrow.

Terry

[Trif]

Cheers everyone for your replies. I'm trying to make as much as I can inhouse. If I hit a brick wall I'll definitly follow your recommendations and use the 3GE bushes.

[Jimmyd]

Trif,

Only got posting to you today, sorry, last couple of days been crap at work. You will find you probably will not have a big shoulder left on the bush but it will be enough. If a find the spare one I have I'll post a picture. I'm at the stage I can find F'all in the garage, bits everywhere.

J

[les g]

have alook at our post todays job was pedal bush,s
you can see how we machined ours in a lathe
we bought a 500mm length of 30mm delrin for ours
£8 from Ringwood Engineering
but we did cheat and buy a set of jons pedals
coz iwas fed up with filing metal etc
cheers les g

[Trif]

Originally Posted by Jimmyd

Trif,

Only got posting to you today, sorry, last couple of days been crap at work. You will find you probably will not have a big shoulder left on the bush but it will be enough. If a find the spare one I have I'll post a picture. I'm at the stage I can find F'all in the garage, bits everywhere.

J

No sweat mate, I know how it is. Thanks for taking the trouble
Trif

[Trif]

Originally Posted by les g

have alook at our post todays job was pedal bush,s
you can see how we machined ours in a lathe
we bought a 500mm length of 30mm delrin for ours
£8 from Ringwood Engineering
but we did cheat and buy a set of jons pedals
coz iwas fed up with filing metal etc
cheers les g

Thanks for that Les, I just finished my pedal box (bar the bushes) and it is a LOT of filing. Working to a budget though and managed to make it for under a tenner. Hope to get my blog up to date this weekend and put a link on the forum to everyone a chuckle!
Cheers Trif