|
|
|
|
#1
27th September 2010, 09:22 PM
|
|||
|
|||
Dont want to pee on the bonfire,before you weld the mounting plate for the hub to the rear upright it will pay you to check the caliper does not hit the upright and the handbrake will work.
It needs to be at about 2 o'clock position,I think you may find the answer in Spikehaus's blog as he has sorted it.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. 
|
|
#2
28th September 2010, 07:06 AM
|
|||
|
|||
|
Quote:
many thanks
|
|
#3
28th September 2010, 12:21 PM
|
||||
|
||||
|
Hi Misty,
Paul is correct just make sure you get the RU8 and 7's handed right, the side with the 2 bolts 94mm apart, not 90mm, need to be at the front facing forward 30 to 40 deg. All the Best....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
