|
|
|
|
#1
28th September 2010, 10:40 PM
|
||||
|
||||
I prefer the one available from Machine Mart as it allows the steel rule guide to sit ontop of the steel box section (as it is stepped) and so ensures the guide is set at the angle using the steel to be cut as the horizontal plain.
A little more expensive but very robust & accurate. cheers andy 
|
|
#2
29th September 2010, 05:19 AM
|
||||
|
||||
|
One of these any good? Nice and robust and cheap..
http://www.toolstation.com/shop/Hand...0/sd150/p84416
|
|
#3
29th September 2010, 11:40 AM
|
||||
|
||||
|
I have got one of these cant fault it perfect angle every time to 0.00 deg
http://www.axminster.co.uk/axminster...er-prod783404/ 
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/
|
|
#4
29th September 2010, 06:16 PM
|
|||
|
|||
|
Thanks all, i may go for the one talonmotorsport mentioned. cheap and looks decent quality. i wont be using it for much else.
Cheers.
__________________
If it has breasts or wheels it will give you problems.  Planning Stage
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
