|
|
|
|
#1
2nd October 2010, 01:33 PM
|
||||
|
||||
old_bill, you can find the basic proportions of the Saturn GRP scuttle here:
http://www.haynes.co.uk/forums/showt...?t=3578&page=5 Personally, I would make the scuttle continue the lines of the bonnet, so the rear would be about 1 cm higher than the front, something along these lines:
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. 
|
|
#2
3rd October 2010, 10:08 AM
|
|||
|
|||
|
Hi Bill, it's more or less like Alga's diagram except I made mine slightly higher because of the height of my DOHC engine. The rest of the dimensions / angles were kept the same, my one was about 20mm higher than "standard"
Enoch
|
|
#3
4th October 2010, 09:09 AM
|
||||
|
||||
|
Try dropping Mark Allanson a PM, Trophy Blue on here, he made his scuttle and I'm sure he has a PDF to show how he did it.
Kind regards John
__________________
Quality parts for the Haynes Roadster - manufactured to a standard, not down to a price. Contact us at component-sales@hotmail.co.uk or visit our website www.3gecomponents.com
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
