|
|
|
|
#2
3rd October 2010, 04:07 PM
|
||||
|
||||
Thanks for the reply. I've been having a think, what about if i put a bulb that lights up red in the clear light on the drivers wing.
Should be ok for IVA? Edit: remembered why now, wont be vertical 
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. Last edited by David_17 : 3rd October 2010 at 04:09 PM. 
|
|
#3
3rd October 2010, 04:11 PM
|
||||
|
||||
|
I think the landy lights may be too small for a FOG. I have that descision to come too.
Do the lights fit ok without any plinth? TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#4
3rd October 2010, 04:38 PM
|
||||
|
||||
|
Yea, they fit fine as i've got them. They have a rubber backplate that screws on first (as you'll probably already know).
I was planning on getting one of these for the fog, so it sits vertical http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT Look ok too. The other option would be to get one of the old type square ones with a bracket bolted to the bottom of the tub for iva, then swap to the one on the arch after.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
