D1 And D2

[Bonzo]

Middled mine if that helps.

If using an alloy side panel there is a fold there & should not foul those two diagonals.

I believe the Saturn side panel will not foul those either

Pesonally I doubt it will make too much difference if you middle them or set them to the outer edge. ( I middled them because it just looked to be the right thing to do )

[HandyAndy]

Originally Posted by Bonzo

I believe the Saturn side panel will not foul those either

Spot on there Ronnie , the GRP side panels don,t come into contact with these diagonals.

cheers
andy

[Twin]

I found it easyer to fit after I had cut them out of 19x19 & not 25x25

[TheArf]

Hi mate dont make the mistake I made, got so carried away cutting up my diagonals, that I cut them out of 25mm not 19mm, bet your gonna double check what you have cut them out of ha ha