|
|
#8
17th October 2010, 07:41 PM
|
|||
|
|||
Trial fit the rear suspension and measure from the seatback uprights of the chassis to the rear uprights face.( clamp some 25x25 on the outside and measure the gap)
My chassis is 20mm out somwhere at the rear and the brackets are placed perfectly on the diff cage and I did the above and its equal both sides,dont ask why.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. Last edited by flyerncle : 18th October 2010 at 10:58 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode