Bike Carbs on a 2L Pinto

[alga]

I downloaded these drawings of Zetec manifold flanges from somewhere, don't remember where. Hope they will be useful:
http://fridge.pov.lt/~alga/zetec/exhaust%20manifold.dxf
http://fridge.pov.lt/~alga/zetec/intake%20manifold.dxf

[flyerncle]

Thanks Albert but it is the Pinto/SOHC one's I need and not the zetec.

[snapper]

Thread highjack alert.......
I am running GSXR 750 carbs and they are nothing but trouble, badly spaced by the last engine owner, I also have a set of carbs with a rear diameter of 32mm but not sure these will be big enough for a Pinto 2.1 running a highly modified head and RL31 cam.
What size are the 600 carbs you boys are running.

[mark]

My carbs arent respaced the manifold is just made to suit the carb spacing

The zx6r carbs are 36mm if i remember correctly these seem to flow enough for 170bhp on spuds current setup and also made 180bhp when he had some cams in

[Tony]

Terry. just in case they of any use, theres someone advertising in today north devon journal classifieds, they breaking 2 ZX6R's so at least you get to see the carbs and no postage as local

[tkpm]

Thanks Tony, will pick the Journal this afternoon.