Hello but I'm not building a Haynes roadster, quite

[Davey]

Well I've hardly had a chance to touch the Dragon since I did the inlet manifold over a month ago and its been bugging me so as we were quiet this afternoon I decided to have a play around with my pedals. I'm going for a top mounted pedal setup, for one thing I think it will be more comfortable with my size 12s and it also puts the brake master cylinder higher up so it should be easier to bleed, well that's the theory anyway.

I mocked the pedal box and pedals up first in 5mm plywood to see how it would all sit and how long the pedals need to be to give a comfortable position then I marked up the main pedal arms for brake and clutch onto some 5mm steel plate before gas cutting them out and dressing them up. Next I cut the pedal plates which are now waiting for dressing. I may get time tomorrow to cut the throttle pedal and finish dressing all the bits up ready for welding. The brake pedal arm may need a slight crank to allow it to clear the steering column.

Sorry no photos yet, maybe when its all sorted if it works out ok I'll take some .

D.