Bonzo's progress

[mr henderson]

Originally Posted by Bonzo

Next job is to do a little research into what sensor wires coming from the ECU I will not need.

A few spring to mind as possible definates .... Air conditioning wires, Power steering pressure switch, canister purge solenoid

A couple of not sure's .... Gearbox speed sensor ? & Inertia cut off switch ?

Some of the sensors may not be needed from your point of view, but it is possible that the ecu won't like being disconnected from them. I really don't know if that would happen in your case, but it might be worth allowing for if you can't get any hard info on it.

In the case of the inertia switch, I would imagine that the ecu would want that, although you could delete if you know which way round it is and join the correct wires (IOW if the switch is normally on (my guess) or normally off)