A "work around"....

[spud69]

Originally Posted by HandyAndy

Nice one, now you put the SB parts in

then the fun with all the RS parts

cheers
andy

Somebody should come up with a pack containing all the sections with the compound, Bar Steward, cuts in Andy...... Would save builders an awful lot of aggro.

AndyH

[HandyAndy]

Originally Posted by spud69

Somebody should come up with a pack containing all the sections with the compound, Bar Steward, cuts in Andy...... Would save builders an awful lot of aggro.

AndyH

What a great idea

I,ll look at putting a pack together

would folk be interested in the " Mitre Cut" pack?

cheers
andy

[les g]

of course they would mate
go for it put a price together
i remember buying a kit from Armoto
it was a long time ago
cheers les g
ps: armoto gave up doing the kits coz they got every single one wrong
and spent the profit sending out the right bits..
then Jason "left "...................
and they dont do them any more

but with your skills and experience i reckon builders would be in safe hands
another feather in your cap mate

[HandyAndy]

Originally Posted by les g

but with your skills and experience i reckon builders would be in safe hands
another feather in your cap mate

blushes.....

Thanks for your kind words Les

I,ll put pen to paper & come up with various "packs", mitre cuts, RS parts, etc etc.
It might give another option to new builders that may worry about certain parts of the chassis prior to starting their build

cheers
andy

[Twin]

When I did the compound mitre on the end of FF2 I noticed if I worked backwards on FF3 that I already had my mitre cut! Simples

[HandyAndy]

Originally Posted by Twin

When I did the compound mitre on the end of FF2 I noticed if I worked backwards on FF3 that already had my mitre cut! Simples

I always start at the "foot" compound mitre cut then work upwards too

cheers
andy

[spud69]

Well i always start at the top, 14deg, cut and work my way down to get to the bottom....

AndyH