Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 31st October 2010, 04:07 PM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 827
Default

Thanks for the helpful post Bonzo!

Just so I can create a cut and clear list for future reference. To go from an early 1.8 silvertop zetec (pre 95) to a Type 9 gearbox I will need a 1.8 clutch from a MK1 mondeo, a spigot bearing from a Sierra, a 1.8 mk1 mondeo flywheel and a clutch release bearing (I'm sure I've read somewhere that these are common Ford Capri bearings?).

So that means that the following should get my bare engine mounted to my type 9 gearbox with no issues:

1.8 Clutch - MK1 Mondeo
Spigot Bearing - Ford Sierra
1.8 Flywheel - MK1 Mondeo (My engine didnt come with a flywheel)
Clutch Release Bearing (CCT133) - Possibly from a Capri
ARP Flywheel Bolts
CVH Starter Motor (Currently Have)
CVH Alternator (Currently Have)
Sierra Sandwhich Plate (Currently Have)
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020

Total Spent so far: Stopped counting
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:53 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.