|
|
|
|
#1
31st October 2010, 06:02 PM
|
||||
|
||||
I'm interested in the camber adjusters, but don't understand how they work.
 Do the wishbones have to be modified, or am i missing something silly?
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. 
|
|
#2
31st October 2010, 06:28 PM
|
|||
|
|||
|
They screw onto the transit joint thread but have been known to fail and you need the top tube to be modified with no thread inside.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#3
31st October 2010, 06:34 PM
|
||||
|
||||
|
Quote:
 Think i'll give it a miss.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
