|
|
#2
6th November 2010, 09:29 PM
|
||||
|
||||
When supported on the brackets Misty they should be self supporting, dont have to be buts its a general guide, and be able to push them down quite easily. As long as you have greased the crush tube, silicone grease or copper slip, they will be fine. THe bushes need to be tight on the crush tube to work properly.
Regards...AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode