wishbones steel thikness

[rally205]

But the book shows the 25mm tube as being 3mm wall thickness in fig. 5.5 on page 58

[squbti]

thank you john that was just what i needed & it couldnt be better than to hear it the man himself .
cheers
samy

[chrisunwin]

Hi

Whilst on the subject of wishbones. Is there any reason that I cant make them from square tube? Reasoning that it is much easier to cut all the angles on square tube rather than all that messing about with round miters which are a real pain.

Regards

Chris

[Wynand]

mine were made from 2mm wall thickness tube 25mm OD.