wishbone bracket jig?

[monsterob]

Just to confirm its the jig to mount the u shaped brackets to the chassis im after

wishbones courtesy of saturn are sat waiting for home positions

[HandyAndy]

Originally Posted by monsterob

Just to confirm its the jig to mount the u shaped brackets to the chassis im after

Doh, silly me

I don,t know why but I thought you meant the jig for "making" the wishbones, I,ll go back to sleep

I,m sure you,ll achieve your target by christmas, can,t wait to see the engine & drive train in your chassis .

cheers
andy

[gingea1pom]

I didn’t use a jig!

I used some M12 threaded bar and spaced two wishbone mounts at the correct distance along the bar,

Then measured many many times

Then tacked then measured again

Then tried a wishbone in to check.

Worked for me just took my time.

Cheers Ginge

[monsterob]

I have considered a similar route ginge but if i can get some jigs by the weekend it should be easier ive already messed about with the wishbones so id like the brackets in optimum position as im not sure how the modified wishbones will behave yet :-)