|
|
#2
5th December 2010, 04:01 PM
|
||||
|
||||
Drive shaft bolts.
1. Clean out as much gunge from the torx as possible. 2. Get torx bit, and an extensiom. Place in hole. 3. Wack extension 20 times with a lump hammer 4. Apply rotational force with a long breaker bar, do not shock to try and rotate. Works every time for me and I have done quite a lot of them. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode