|
|
#4
6th December 2010, 09:26 AM
|
||||
|
||||
A good way to clamp your chassis is to get 3 lengths of 25mm box and lay them across your bottom rails on your build table and screw them down to your table with some no. 10 screws. As said, weld as much as you can on alternate sides and should keep it pretty un-twisted.
AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode