|
|
#5
7th January 2011, 09:19 AM
|
||||
|
||||
As said Dave these work a treat:
http://www.screwfix.com/prods/47149/...t-Holesaw-70mm If you do then drill the pilot hole separately then drill through with the hole saw with just very light pressure so that it doesn't dig in and rip the gel. Practice on a bit of scrap first. All the Best.....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode