3d cad - Haynes Forums

fabrun 3d cad 15th December 2009, 06:28 PM

Bonzo Welcome to the forum 15th December 2009, 06:42 PM

londonsean69 It's missing the engine bay... 15th December 2009, 07:26 PM

AshG its pants that is. you got... 15th December 2009, 07:46 PM

londonsean69 I missed it because it is on... 15th December 2009, 08:01 PM

fabrun thanks for all Is solid... 16th December 2009, 02:55 AM

Superloom Fabrice, Nice bit of work, i... 16th December 2009, 11:05 AM

twinturbo Last time I got realy serious... 16th December 2009, 11:15 AM

fabrun hi cosmosworks (fea analysis... 16th December 2009, 11:42 AM

fabrun i must admit that building... 16th December 2009, 04:28 PM

HandyAndy hi, yes there are a few... 16th December 2009, 04:35 PM

Bonzo There was a drawing that... 16th December 2009, 05:30 PM

alga Oooh, shiny! Could you post... 17th December 2009, 01:43 PM

fabrun no problem i want to finish... 17th December 2009, 02:47 PM

fabrun little... 18th December 2009, 03:21 AM

fabrun one more update does someone... 19th December 2009, 11:22 AM

Beardy_John Fabrun, nice work. I've drawn... 19th December 2009, 09:12 PM

dogwood Hi Fabrun. All looks very... 20th December 2009, 08:44 AM

fabrun cp6 et cp7 bien vu je corrige 20th December 2009, 09:24 AM

fabrun how much just for this... 20th December 2009, 10:58 AM

fabrun modified http://free0.hiboox.c... 20th December 2009, 04:32 PM

alga The upright measures 154-155... 21st December 2009, 11:55 PM

fabrun thanks a lot 22nd December 2009, 03:23 AM

LeonN It is all looking good man.... 22nd December 2009, 08:04 AM

fabrun thanks again i 've found... 22nd December 2009, 09:30 AM

LeonN Yer you can. I made a bracket... 22nd December 2009, 12:23 PM

LeonN http://img36.imageshack.us/img... 22nd December 2009, 12:31 PM

fabrun chassis in... 23rd December 2009, 10:14 AM

bobbyh any chance of a copy of the... 24th December 2009, 09:59 AM

fabrun i share (with everyone) just... 24th December 2009, 10:11 AM

fabrun i add a question... 24th December 2009, 10:14 AM

fabrun time for an... 4th January 2010, 10:25 AM

Chri Please can you send me a copy... 24th February 2010, 07:43 PM

fabrun iges sent just ask by pm,... 25th February 2010, 05:57 PM

fabrun this is the donor car i won't... 25th February 2010, 06:04 PM

GraemeWebb Hi fabrun I used a E36 donor.... 25th February 2010, 10:33 PM

fabrun thanks a lot graemewebb i... 26th February 2010, 08:04 AM

fabrun some news i 'll add a... 5th March 2010, 10:37 AM

fabrun http://free0.hiboox.com/images... 5th March 2010, 10:37 AM

fabrun http://free0.hiboox.com/images... 5th March 2010, 10:38 AM

AshG looking good that. what... 5th March 2010, 11:05 AM

GraemeWebb Looks much like I have... 5th March 2010, 11:31 AM

AshG was also thinking it may be... 5th March 2010, 11:57 AM

AshG something like this sorry for... 5th March 2010, 12:07 PM

fabrun update http://free0.hiboox.co... 5th March 2010, 02:44 PM

fabrun what about, 5mm for the... 5th March 2010, 04:19 PM

AshG you will need to measure the... 6th March 2010, 09:23 PM

jonB Very nice work fabrun. Did... 7th March 2010, 04:28 AM

fabrun sorry jonB, i never had time... 7th March 2010, 10:02 AM

AshG hi john welcome to the forum.... 7th March 2010, 07:51 PM

jonB Hi Guys Thanks for that. Yes... 9th March 2010, 03:40 AM

ozzy1 You may find that beam... 9th March 2010, 09:35 AM

fabrun update with the... 13th March 2010, 10:59 AM

fabrun inside the... 13th March 2010, 11:06 AM

fabrun a cut for a better... 13th March 2010, 11:09 AM

twisterracing Fabrun .....Love your... 1st April 2010, 02:58 PM

fabrun thanks a lot skill with... 1st April 2010, 03:12 PM

Peter-C Just pure magic. I'm still... 1st April 2010, 06:22 PM

Davey MS Paint? Solidworks? I'm... 1st April 2010, 07:08 PM

John Marchant Nice work 6th April 2010, 10:02 PM

fabrun hi why not? can you sell me ... 7th April 2010, 04:38 AM

fabrun update http://i63.servimg.co... 8th April 2010, 06:11 PM

fabrun http://i63.servimg.com/u/f63/1... 8th April 2010, 06:13 PM

fabrun http://i63.servimg.com/u/f63/1... 8th April 2010, 06:17 PM

John Marchant For all of you CAD fans out... 23rd April 2010, 08:56 PM

fabrun gearbox added (roughly... 2nd May 2010, 08:02 AM

fabrun http://i63.servimg.com/u/f63/1... 2nd May 2010, 08:04 AM

fabrun forget the name in english :o... 7th June 2010, 10:54 AM

alga Steering rack! Is the... 8th June 2010, 09:48 PM

GraemeWebb No. The BMW rack is to long.... 8th June 2010, 09:53 PM

fabrun hi everyone holidays are... 31st August 2010, 01:50 PM

fabrun http://i33.servimg.com/u/f33/1... 31st August 2010, 01:51 PM

Gunter Cad drawings 4th September 2010, 09:25 PM

fabrun hi gunter no problem pm me... 5th September 2010, 04:04 AM

maxubar hi. i sent you a pm too with... 5th September 2010, 07:29 PM

fabrun yes i got it 6th September 2010, 04:06 AM

maxubar I didn't got anything. it's a... 7th September 2010, 01:38 AM

fabrun re-sent br 7th September 2010, 03:34 AM

maxubar I didn't received it. can you... 7th September 2010, 12:19 PM

fabrun look in your pm as well 7th September 2010, 12:31 PM

maxubar Oh sorry i thought you were... 8th September 2010, 02:16 AM

ftaffy PM Sent fabrun. (2 actually... 10th January 2011, 08:36 PM

fabrun hi i sent you an email... 11th January 2011, 02:46 AM

Guest Still trying to get my head... 11th January 2011, 11:37 AM

fabrun Hats off to those who can... 11th January 2011, 12:10 PM

fabrun Last news: The build has... 11th January 2011, 12:14 PM

Guest Cheers and I'm hoping to use... 11th January 2011, 12:40 PM

mr henderson I've not tried a Haynes... 11th January 2011, 03:53 PM

ginger nutter Pm sent fabrun :) 11th January 2011, 03:59 PM

Guest So was my copy of solidworks... 11th January 2011, 04:29 PM

Guest Solidworks is the bees knees... 15th February 2011, 12:43 PM

mr henderson You can do the same thing... 15th February 2011, 03:41 PM

More replies below current depth...

John.W Lhd 4th January 2010, 10:28 PM

HandyAndy welcome to the forum John,... 4th January 2010, 10:41 PM

Talonmotorsport I'm sure you could cut the... 4th January 2010, 11:27 PM

John.W I think the Ford engine is... 5th January 2010, 06:28 AM

More replies below current depth...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode