|
|
|
|
#1
14th January 2011, 08:57 AM
|
||||
|
||||
 You are not the first to do that, & I,m sure you won,t be the last Glad you noticed it so quickly & got it sorted, I can send you a replacement bracket if you wish Andy? just let me know  cheers andy 
|
|
#2
14th January 2011, 09:30 AM
|
||||
|
||||
|
I know that pain only too well
 I welded up all my rear wishbone brackets on my chassis, 25mm out, because I was using a drawing at work and leaving my book at home. I nearly cried when I realised. That took ages with grinders, air chisels and files to clean it all up and remake it.
|
|
#3
14th January 2011, 09:33 AM
|
|||
|
|||
|
Quote:
|
|
#4
14th January 2011, 09:51 AM
|
||||
|
||||
|
Hello Andy,
We've have your address from your previous orders Andy so we have sent a replacement wishbone bracket 1st class so hopefully you shall have it tomorrow to continue with the build. Plenty of people have made that mistake or welded the bracket on the wrong side of CP3/4. For the items you have ordered sofar don't worry about the cost. ..... All the Best.....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH
|
|
#6
15th January 2011, 07:16 PM
|
|||
|
|||
|
Quote:
Bracket arrived this morning...perfect as usual thinking i might send you guys down a haggis as a thank you !!!
|
|
#7
15th January 2011, 09:27 PM
|
|||
|
|||
|
i made a similar boo boo !
i got my plates the wrong way round front to back !!! even with the book ! measure measure measure then measure cut measure tack measure weld . even then you can still go wrong !!!
__________________
theres a box ! im not allowed in it ! i have to think outside !
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
