2.0 Zetec sump mods.

[alga]

Originally Posted by baz-r

any idea what amount needs to be removed (fiesta,escort sums are diffrent to mondeo)
my box is still in the sierra so it would be good to have the block bottom to sump bottom distence if any one has it

Here's the sump from the 1993 Mondeo 2.0, with the 15 cm waterline marked out:
http://picasaweb.google.com/10088104...eat=directlink
For the Type 9 box, the distance from the centre of the input shaft to the bottom of the bell is about 155 mm.

[baz-r]

yes fiesta has the bulge at no1 cyl end

[baz-r]

Originally Posted by alga

Here's the sump from the 1993 Mondeo 2.0, with the 15 cm waterline marked out:
http://picasaweb.google.com/10088104...eat=directlink
For the Type 9 box, the distance from the centre of the input shaft to the bottom of the bell is about 155 mm.

chears for that

[Bonzo]

Here's the mod I done to my 1.8 Silvertop Baz



Cut line marked out



Material removed



Job done

I worked out that I had lost aproximately 1/2 litre of oil capacity .... If needed, I could extend the rear of the pan, I'll see what the engine has to say first

[flyerncle]

Your talent is wasted Ronnie

[baz-r]

Originally Posted by Bonzo

Here's the mod I done to my 1.8 Silvertop Baz



Cut line marked out



Material removed



Job done

I worked out that I had lost aproximately 1/2 litre of oil capacity .... If needed, I could extend the rear of the pan, I'll see what the engine has to say first

wicked just what i needed

i see you have one of them tigs in the background did you get it from lts/ebay how has it been had any trouble with it
just took a gamble and orderd one