![]() |
|
#1
|
|||
|
|||
![]() I used one from Lynx on an R1 Engine, see http://www.lynxae.co.uk/Products-Bikesports.htm
Works quite well but you will need to fabricate all your own brackets Rob |
#2
|
|||
|
|||
![]() you can get a gear and motor from one of the kit manufactures
it was a small gear that pinched inbetween prop and diff flange wit what looked like a fiat starter motor thay where at stonleigh in same hall as satern in the top r/h corner MNR i think but not too sure |
#3
|
|||
|
|||
![]() I used a bike starter motor with a matching sprockety thing made in plastic just in case it decided to go into reverse without me knowing about it....
![]() |
#4
|
|||
|
|||
![]() I used a seat ibiza starter motor activated via a relay which is interlocked against the neutral light
tilly |
#5
|
|||
|
|||
![]() Thanks guys...I think I know what I have to do now...
|
![]() |
Thread Tools | |
Display Modes | |
|
|