Sierra column shroud?

[twinturbo]

Originally Posted by jasongray5

I have 2 different versions? Neither fits?
I think I need one from a facelift mk2 Sierra, as the column came from a G reg 2.0 DOHC
I only need the top half? And would trade one of the other shrouds, or beer tokens, or a MT75 Gearbox?
Any one got one? Or any other Ideas on making the other ones fit?
Cheers again, Jas

Take a pic of what you have...

TT

[Bonzo]

Are you sure that you are not missing the little upper shroud mounting clip ( Just above the hazzard warning switch !!??

The shroud I sent home with you should fit.

That was one removed from a 91 2 litre Twin cam jobby

As TT said, try & get a picture up

[jasongray5]

Yeah Ron I have that one of yours, and another I got out of a P100, they are the same, and then mine is different again? I have the little thingy, but it wont physically fit over the shaft?



Mine is the one on the Right

[twinturbo]

Originally Posted by jasongray5

I have the little thingy, but it wont physically fit over the shaft?

Ask at the chemist for XL.

TT

[twinturbo]

the one on the right is a stock MK2 none adjustable lower half.

Front left looks like a MK2 adjustable lower half

Rear left looks like a MK2 top and bottom.


What column do you have.

TT

This part of a seven nearly always looks crap as the shroud doesn't meet up with the dash, a single tube with a steering wheel on the end of it with switches elsewhere looks far better

[Bonzo]

Bit of a mystery there Jas

Wish I was close enough to pop in & have a gander

I have no idea how many different types of column & shroud were used on the sierra !!

I'll keep an eye in the breakers mate, you never know, I might come across another complete Sierra steering assembly

[jasongray5]

Originally Posted by twinturbo

Ask at the chemist for XL.

TT

Quality!!


My donor came with the non adjustable shroud, so im guessing non adjustable?

[jasongray5]

Yeah it wouldnt be so bad if one of the other covers fitted it, but they dont, so hey ho. I do have the column out of the p100, but there is no key to get the barrel out of the ignition, and I really need the steering lock for IVA.

Fabby, didnt someone make their own shroud using a plastic sweet jar? Im sure it was Dogwood said he had?

[Bonzo]

Originally Posted by jasongray5

I do have the column out of the p100, but there is no key to get the barrel out of the ignition, and I really need the steering lock for IVA.

Jas

I changed a Sierra lock the other day without the key

Twated the little detent pin in with a pin punch. Prised the lock out of the housing slowly, slowly .... Once it was part way out, I was able to turn the lock assembly to the no 1 position & pull the rest out with ease

New lock just popped straight in as it should , jobs a good un