Roll bar horizontal and stays

[HandyAndy]

Originally Posted by Andy_B

that would give me 16 bolts and allow the roll bar to be removed....

Thats how I did mine too , I,ve got some photos, I,ll have a dig about in my photo,s & post up what I have,

Just got home & having dinner, so give me an hour or so

cheers
andy

[flyerncle]

Did the same as H A and cut holes in the top and lower mounting plates to sit the tube through and weld inside and out.

[Andy_B]

Cheers Andy enjoy !! Fly out of interest did the hole in the plate take much fettering to compensate for the angle of the tube ?

[HandyAndy]

Originally Posted by Andy_B

Cheers Andy enjoy !! Fly out of interest did the hole in the plate take much fettering to compensate for the angle of the tube ?

No not really, tho it probably took more time getting the angle right before welding, tho I must admit it did take a couple of goes, but got there in the end.

Just going thru my photos.....theres alot of em

Have you welded in your cross bar into your roll hoop yet? reason I ask is ...it helps if you have the seats at hand to get the height of your harness mounts correct.

cheers
andy

[HandyAndy]

Here.s a couple of pics, hope its what you were looking for ?





please excuse the wiring was still at the "fitting out " stage.

hope it helps.

cheers
andy

[Andy_B]

Cheers Andy thats exactly my plan....no seats yet so may just tack the cross beam in position until i can afford them...hoping for a set of triton seats ...need to be nice to wifey its my birthday soon !!!

[HandyAndy]

Originally Posted by Andy_B

Cheers Andy thats exactly my plan....no seats yet so may just tack the cross beam in position until i can afford them...hoping for a set of triton seats ...need to be nice to wifey its my birthday soon !!!

I,ve done my back stays like this to hopefully give me a bigger "Boot " door, as one day I,m hoping to line/box in the space inside the tub

Triton seats are A1, ......ahhh one day I,ll get some ...I travelled all the way down to the Newark show in Spuds car that has Triton seats, very comfortable, felt fresh as a daisy when we got there .

Hope the pics help.

cheers
andy