New Bonnet - Saturn

[rapidtornado]

looking v.nice... Dave hurry and and get it on your beast we are all waiting with baited breath

Great job Andy

[rapidtornado]

Andy
When you get chance would you be able to give us the dimensions at the front of the bonnet to the top rail, just want check the height as I haven't finialised my engine brackets yet and this will determine how much I drop below the rails

Cheers mate

Rapid

[RAYLEE29]

looking good there Andy. personally i want my bonnet to have no bulge at all but thats just me being awkward
Ray

[spud69]

Originally Posted by rapidtornado

Andy
When you get chance would you be able to give us the dimensions at the front of the bonnet to the top rail, just want check the height as I haven't finialised my engine brackets yet and this will determine how much I drop below the rails

Cheers mate

Rapid

Hi Rapid, the dimensions of the scoop are:

90mm from front of bonnet
60mm deep and 220mm wide at front
280mm wide 300mm from front of scoop.

Hope that helps.......Andrew

[rapidtornado]

Originally Posted by spud69

Hi Rapid, the dimensions of the scoop are:

90mm from front of bonnet
60mm deep and 220mm wide at front
280mm wide 300mm from front of scoop.

Hope that helps.......Andrew

Thanks Andy, much appreciated

[spud69]

Well, the first bonnet is out of the Rev 2 mold for the new bonnet....

First one is going to Enoch for trial fitting of the DOHC engine. Should be fine.

The bonnet shown is the first one out the mold and is still a little dull, the mold needs some extra buffing, waxing and working in but looking good.

Andrew

[Bonzo]

That is looking a treat Andy, well done mate

The new bonnet looks like it will solve quite a few clearance issues on a lot of builds

Tis nice watching the Saturn product range expand

[spud69]

Thanks Ronnie,

It's nice to put new products to the market place to, keep the roadster developing and not become stagnant. Also makes a change not to be working on the same things day in and day out.

Will be good to see your new build coming on, should be zooming along with a Handy chassis pack.

Cheers....Andrew

[Andy_B]

Originally Posted by rapidtornado

Andy
When you get chance would you be able to give us the dimensions at the front of the bonnet to the top rail, just want check the height as I haven't finialised my engine brackets yet and this will determine how much I drop below the rails

Cheers mate

Rapid

Any chance i could take a peak at your engine mounts ..am at the same position

[Twin]

Well, looks like I may have to start saving