Slitting discs ..These are really good !!

[TSM Locost]

In my job i buy 200 @ a time for about the same price as GAZ found http://cgi.ebay.co.uk/1mm-Cutting-Di...item20b75b28c1, you need to check that they are classed as INOX as this is the correct type for stainless and last a long time cutting mild steel.

[AshG]

i got some makita ones once as thats all they had left. i have never gone back nothing gets close to them

[dogwood]

I used the ones from skroofix.
They are cr*p. 1 disc one cut ( If ya lucky)

[gaz05]

Originally Posted by dogwood

I used the ones from skroofix.
They are cr*p. 1 disc one cut ( If ya lucky)

I've got some of the Screwfix ones left in the garage. Haven't touched them since I bought the ones in the link.

[Bonzo]

Originally Posted by gaz05

I've got some of the Screwfix ones left in the garage. Haven't touched them since I bought the ones in the link.

Send em over to Dogwood, sounds like he needs em

Sorry, i'll get my coat

[AshG]

when buying them look for ones wirh inox in them as they last longer than aluminium oxide variants

[monsterob]

now i bought these

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT

50 off for £16 ish about 34p per disc i hadnt used them till today and i was very surprised used one where normally id have used 3-4 cutting 3mm plate

shame my grinders letting go had it in bits earlier trying to chase a "new noise " but no joy. it still works but holding it at arms length with your eyes closed hiding behind some 3mm ali the cuts arent so accurate